Minggu, 09 Februari 2014

Reset the printer NVRAM initialization Super NVRAM initialization or problem solving hp laserjet p 2015

NVRAM initialization

CAUTION: Only perform the following procedure if absolutely necessary. Performing an NVRAM initialization resets some parameters that cannot be restored later.
NVRAM initialization sets all default variables stored in NVRAM back to factory default values or to a default ROM value, depending on the variable. It also performs a system reset.
NVRAM initialization resets the following:
All menu settings to factory default values
• Factory settings such as formatter number, page counts, and factory paper settings Use the following procedure to perform an NVRAM initialization.
1. Turn the printer off.
2. Press and hold down the Go button.
Turn the printer on, and continue to hold the button for at least 20 seconds. During this process, the Go button, Attention, and Ready LEDs each turn on.
4. Release the Go button.
The printer lights begin cycling. After the NVRAM initialization is complete, the printer returns to the ready state.

Super NVRAM initialization
This feature is similar to NVRAM initialization, except all of NVRAM is re-initialized (including the configuration parameters not reset by an NVRAM initialization).
Use the following procedure to perform an NVRAM initialization.
1. Turn off the printer.
2. Press and hold the Go button.
3. Turn on the printer and continue to hold the button for at least 50 seconds. During this
process, the Attention, Ready, Go lights turn on. Then the Attention and Ready lights turn off,
leaving only the light illuminated.
4. Release the Go button. The Go, Ready and Attention lights turn on.
Press and hold the Go button. All lights turn off. During the next three seconds, the Go, Ready and Attention lights turn on in that order, one per second.
6. Release the Go button to perform the initialization. The control panel lights begin cycling from front to back. After the Super NVRAM initialization process is complete, the printer returns to the ready state.

Related Post:

Diposting oleh instalos di 06.00
Label: , , , , , , , , , , , ,

0 komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)
 
Copyright 2009 Printer Resetter
Powered By Blogger