Removal and replacement Product input trays and cabinet wheel locks HP LASERJET P 4010 and 4015 series

When the product and input trays are placed on the cabinet stand, the product and trays must be locked together to prevent them from tipping over. This is not necessary (but it is recommended) if the product and trays are placed on a level work surface. When servicing the product and accessories, unlatch the locking mechanism and separate the product and its accessory components.
The cabinet stand includes locks for the wheels at its base. Make sure that the wheels are locked when the product is in place. The wheels should be unlocked only when the product is being moved.

Figure 6-3 Product input trays and cabinet wheel locks

DC controller diagram
You must disconnect wires harnesses or cables from the DC controller PCA before you can remove or replace many of the product components. Use the following diagram to assist with disconnecting the cables and wire harnesses from the DC controller PCA.

Table 6-2 DC controller connectors

Connector Functionality Pin Configuration
J70 Control Panel connector 8-pin
J71 SL102 Tray 1 Pickup Solenoid 2-pin
J72 SL101 Tray 2 Pickup Solenoid 2-pin
J73 M103 Tray 2 Lift Motor 2-pin
J74 TG101 Memory Tag I/O 2-pin
J75 FN102 Cooling Fan 3-wire
J76 PS104 Face Down Output Full Sensor 3-pin
J77 CL101 Feed Clutch 3-pin (2-wire)
J78 SW101 Door Open Switch 3-pin
J79 FN103 Cooling Fan 4-pin (3-wire)
J80 Not used 6-pin
J81 PS105 Tray 1 Media Present Sensor 3-pin
J82 Fusing Assembly 7-wire
J83 Envelope Feeder Accessory 5-pin
J84 Duplex Accessory 6-pin
J85 Power Supply PCA (+24Vdc/3.3Vdc) 6-wire
J86 Scanner Motor/Beam Detect 7-pin
J87 M102 Drum Motor 8-pin (7-wire)
J88 Paper Deck Accessory 5-pin
J89 M299 Fusing Motor 10-pin
J90 Stacker/Stacker-Stapler/Mailbox 8-pin
J91 M101 Feed Motor 7-pin
J92 PS101 Tray 2 Media present PS107 Tray 2 Media Stack Sensor #1 PS907 Tray 2 Media Stack Sensor #2 8-pin
J93 Laser/Driver PCA 11 -pin
J94 PS102 Pre-feed Sensor PS108 Media Width Sensor #2 PS103 Top of Page Sensor PS106 Media Width Sensor #1 12-pin
J95 Power Supply PCA 18-pin
J96 Power Supply PCA 20-pin
J97 Intermediate PCA to Formatter PCA 32-pin Ribbon
J98 Not used
J99 SW102 Tray 2 Media Size Switches 4-pin
TB700 3.3 volts dc
TB701 CRN

Related Post:

4010

• Pickup feed and delivery system hp laserjet p 4010 AND 4015 series
• Removal and replacement Registration assembly printer hp laserjet p 4010 and 4015 series

and

• Epson Stylus Photo R1400 Printer and Premium Ink Compatible Cartridges Produces Impressive Results
• Common Printer Problems and Solutions
• Pickup feed and delivery system hp laserjet p 4010 AND 4015 series
• New HP Printer Manufacturing facility will produce 40 Million Inkjet and Laserjet printers each Year
• Download HP Scanjet 5590 Driver for Windows XP Vista and Windows 7
• Removal and replacement bongkar pasang hp Laserjet p 2015
• Removal and replacement Registration assembly printer hp laserjet p 4010 and 4015 series
• Lexmark Using Inkjet Cartridge Chips AND Spyware!
• Live from San Diego HP NYSE HPQ Imaging and Printing event

4015

• Pickup feed and delivery system hp laserjet p 4010 AND 4015 series
• Removal and replacement Registration assembly printer hp laserjet p 4010 and 4015 series