Free Reset the Ink Level for Canon MX300

Solution to reset the ink level for Canon MX300. The methode get from printer forum

1. Disconnect the power cable
2. Connect it while holding down the power button
3. With the power button still down, press twice the "Cancel/Stop" red button
4. Release the power button
5. The printes turns into a kind of factory mode...(wait for about 10 seconds, utils it says "Idle")
6. Press the ">" (next to the "OK" button) once."Shipping Mode 3"
7. Press the "OK" button.
8. Press "OK" again for "Without cleaning"
9. A test page will print..
10. Open the cover, like you are about to change the cartridges.
11. Disconnect the power cable again.
12. Take out both cartridges.
13. Close the cover.
14. Connect the power cable once again.
15. Turn the printer on.
16. Now just put the cartridges back...

Related Posts :

Read More..

HP psc 1400

HP psc 1400/1401/1402/1403/1406/1408/1410/1410v/1410xi/1415/1417

Cartridge HP 21 black & Cartridge HP 22 colour 

Refill Instructions for HP 21 black|HP 22 colour

Read More..

Download NVIDIA Quadro4 750 XGL

Free download NVIDIA Quadro4 750 XGL Video Card Driver for Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP, Windows NT 4.0, Windows XP 64-bit, Windows Server 2003 64-bit. For those who have lost the installation CD.

OS	Type	Version	Date Added	File Size	File Type	Download Link
Windows 95	Driver	81.98	2008-06-10	11.88 MB	exe	NVIDIA Quadro4 750 XGL Windows 95 Video Card Driver Download
Windows 98	Driver	81.98	2008-06-10	11.88 MB	exe	NVIDIA Quadro4 750 XGL Windows 98 Video Card Driver Download
Windows ME	Driver	81.98	2008-06-10	11.88 MB	exe	NVIDIA Quadro4 750 XGL Windows ME Video Card Driver Download
Windows 2000	Driver	93.71	2008-06-10	40.60 MB	exe	NVIDIA Quadro4 750 XGL Windows 2000 Video Card Driver Download
Windows XP	Driver	93.71	2008-06-10	40.60 MB	exe	NVIDIA Quadro4 750 XGL Windows XP Video Card Driver Download
Windows NT 4.0	Driver	77.72	2008-06-10	12.18 MB	exe	NVIDIA Quadro4 750 XGL Windows NT 4.0 Video Card Driver Download
Windows XP 64-bit	Driver	91.36	2010-01-31	27.53 MB	exe	NVIDIA Quadro4 750 XGL Windows XP 64-bit Video Card Driver Download
Windows Server 2003 64-bit	Driver	91.36	2010-01-31	27.53 MB	exe	NVIDIA Quadro4 750 XGL Windows Server 2003 64-bit Video Card Driver Download

Read More..

Problem solving pemecahan masalah Status light patterns hp laserjet p 2015

Table Status-light legend

Error code : 10007
Description :
Initialization/Startup
While in the Startup state, the Go, Ready, and Attention lights cycle (at the rate of 500 ms) one after another.
Reconfiguration Initialization
During the printer start up, you can request special initialization sequences that reconfigure the printer. When one of the sequences is requested, such as cold reset, the lights cycle as in the Initialization/Startup state.
Job Cancel
After the cancellation process has been completed, the printer returns to the Ready state.

Action : During the Initialization, Reconfiguration, and Job Cancel processes, pressing buttons has no effect.

Error code :
Description : Processing Data
The printer is processing or receiving data.

Action : To cancel the current job, press the Cancel button.

Read More..

Epson Stylus Photo R1400 Printer and Premium Ink Compatible Cartridges Produces Impressive Results

At our Louth office we unpacked a new Epson Stylus Photo R1400 yesterday.  Instead of using genuine Epson inks I installed Premium Inks Compatible Ink Cartridges to replace (T0791 Black, T0792 Cyan, T0793 Magenta, T0794 Yellow, T0795 Light Cyan, T0796 Light Magenta).

Set up was very easy for this machine.  I just plugged in the USB cable from my laptop to the R1400 printer after installing software from the provided CD.  It took a while for the CD to install, but after a re-boot we were up and running very quickly.

The supplied Epson software includes an Easy Photo Print Utility.  With this you simply have to browse for the image you are printing, then select the paper size and type.  To begin with I used the automatic factory settings and printed some classic Van Gogh paintings on A4 Jetplay matte inkjet paper 190 g/m2 paper.  The first print was of the Café Terrace at Night, painted in mid-September 1888.  The first thing to catch my attention were the oil brush strokes that seemed almost to add an extra dimension, standing proud of the paper!  Important to also note the dynamic range of colours produced by the Epson R1400 in conjunction with the Premium Inks cartridges.

Today (07/05/12) I experimented with A3 size Sumvision 260 gram glossy photographic paper.  I decided to select a powerful image of a Peacock featuring vivid iridescent blue-green colours.  Again the results were impressive, however I think they would have looked better on a high quality matt paper; and although the resolution of the source picture was high, on closer inspection the clarity and definition of the image are not 100%.

In the afternoon I purchased a Wilkinson 20" x 16" plastic wood effect glazed picture/photo frame incorporating a cream mount.  The opening was almost too wide (on the shortest sides) to comfortably seat the A3 print, however with some careful maneuvering this was achieved.  There was an inch of play on the length meaning we lost a couple of centimetres of the image behind the mount.

A nice gentleman came into the shop today looking to purchase a R1400 printer after seeing the unopened box in the window last week.   I informed him that we only had one unit left and this had been used for demonstration purposes over the last couple of days.  After seeing the prints it had performed, he wanted to purchase it.  So I no longer have an R1400 printer to play with which I am a little sad about.

I have just ordered a cheaper Epson B1100 A3+ printer that I will put to the test later this week.

Compatible cartridges for the Epson Stylus Photo R1400 are available from http://www.printercartridges.net/

We are looking for a cheap reliable supplier of real light wood picture frames to house A4, A3 and A3+ prints.  If any readers can recommend a seller then please reply to this blog.  Thank you.

Read More..

Gigabyte GV N460UD 1GI Drivers Download for win xp 7

free download driver Gigabyte GV-N460UD-1GI

Gigabyte GV-N460UD-1GI Specification Chipset: GeForce GTS 460
Core Clock: 675 MHz
Shader Clock: 1350 MHz
Memory Clock: 3600 MHz
Process Technology: 40 nm
Memory Size: 1 GB
Memory Bus: 256 bit
Card Bus: PCI-E 2.0
Memory Type: GDDR5
DirectX: 11
OpenGL: 4.1
PCB Form: ATX
Digital max resolution: 2560 x 1600
Analog max resolution: 2048 x 1536
Multi-view: Yes
I/O: HDMI*1 (by adapter)
DisplayPort* (by adapter)
mini HDMI*1
mini DisplayPort*
DVI-I*2
DVI-D*
D-sub*1 (by adapter)
Card size: H43 mm x L238 mm x W130 mm
Power requirement: Minimum 450W or greater system power supply Two 6-pin external power connectors
link download
Gigabyte GV-N460UD-1GI Windows XP (32-bit) Driver
Gigabyte GV-N460UD-1GI Windows XP (64-bit) Driver
Gigabyte GV-N460UD-1GI Windows Vista (32-bit) Driver
Gigabyte GV-N460UD-1GI Windows Vista (64-bit) Driver
Gigabyte GV-N460UD-1GI Windows 7 (32-bit) Driver
Gigabyte GV-N460UD-1GI Windows 7 (64-bit) Driver
Free and easy way to download a Gigabyte GV-N460UD-1GI Drivers

Read More..

Service Adjustment Program Stylus Epson

Epson Stylus Color type 480,580,680,777,780,790,860,1160,61,62,70,825
830,870,890,950,1270,1280, printer service program download (336) FREE!
This is the most downloads for reseters ( according to my downloads count )Just download at this link :
stylus photo C67 Download Free
stylus photo 510 Download Free
stylus cx3900 Download Free
stylus Photo R210 Download Free
stylus Photo R310 Download Free
stylus Photo C58 Download Free
stylus C60 Download Free
stylus Photo C59 Download Free
stylus Photo C20,40 Download Free
stylus Photo C41,42,43,44,45,46 Download Free
stylus Photo C61,62 Download Free
stylus photo C63,64 Download Free
stylus photo 83,84,85 Download Free
stylus photo C67,68 Download Free
stylus photo C65 Download Free
stylus Color 580 Download Free
stylus Color 680,777 Download Free
stylus photo C80,70 Download Free
stylus Color 780,790 Download Free
stylus Color 925 Download Free
stylus Color 1520,3000Download Free
stylus Collor 880 Download Free

Read More..

Epson Stylus Color Photo R 290

Using reset program we can print from Epson Stylus Color Photo R-290 when it doesnt
work & requesting for Service.

Download the reset program from below:
Epson Stylus Color Photo R-290
note : Please Disable Download Accelerator Plus to Download file Successfully
Do all the process with your own risk

Read More..

Download NVIDIA Tesla C2050

Free download NVIDIA Tesla C2050 Video Card Driver for Windows XP, Windows XP 64-bit, Windows Vista, Windows 7, Windows Vista 64-bit, Windows 7 64-bit. For those who have lost the installation CD.

OS	Type	Version	Date Added	File Size	File Type	Download Link
Windows XP	Driver	276.42	2012-01-11	100.91 MB	exe	NVIDIA Tesla C2050 Windows XP Video Card Driver Download
Windows XP 64-bit	Driver	276.42	2012-01-11	126.68 MB	exe	NVIDIA Tesla C2050 Windows XP 64-bit Video Card Driver Download
Windows Vista	Driver	276.42	2012-01-11	122.93 MB	exe	NVIDIA Tesla C2050 Windows Vista Video Card Driver Download
Windows 7	Driver	276.42	2012-01-11	122.93 MB	exe	NVIDIA Tesla C2050 Windows 7 Video Card Driver Download
Windows Vista 64-bit	Driver	276.42	2012-01-11	158.72 MB	exe	NVIDIA Tesla C2050 Windows Vista 64-bit Video Card Driver Download
Windows 7 64-bit	Driver	276.42	2012-01-11	158.72 MB	exe	NVIDIA Tesla C2050 Windows 7 64-bit Video Card Driver Download

Read More..

Canon BJC 2100 waste ink tank full

ERROR: Uesd ink tank is full

Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data

If it does not work. Try some more times. Thanks every one above.

Read More..

head cleaning epson R230x

1. Turn on the Epson Stylus Photo R230 printer or yours R230x
2. Click Start> Control Panel> select Printers and Faxes> Epson R230
3. Click Select Printer Printing Task prefference on the box that is on the right side of the window or can 
    also right-click on the Epson R230 and select Printing Prefferences
4. Select the Maintenance tab dialog box appears so that these

5.Then select Head Cleaning as shown in the picture above that I put a red circle, it will 
   display a dialog box like this

Select the start like in the picture above that I marked in red arrows, then this machine will do the print head cleaning, ink pumping Please wait for the printer to finish.

Read More..

Canon iR Firmware Versions

iR1600/2000 - Main 38.02 NIC 3.00 Finisher L1

iR2200/2800/3300 - Boot ROM 13.33C Sys 40.06 Msg 40.06 RUI 40.04

HD Format10 G3 Fax 18.08

iR2200N/2800N/3300N - Boot ROM 13.33N Sys 40.06

iR2200i/3300I - Boot ROM 13.33N Sys 20.08N Msg 20.08 RUI 20.05

HD Format 4 G3 Fax 18.08

iR5000/6000 - Boot ROM 13.53 Sys 17.01 RUI 15.05 HD Format 6

iR5000N/6000N - Sys 17.01N

iR5000/6000 (with BW2) - Boot ROM 9.28C 512 Sys 72.01 6326 RUI 71.01 434 HD Format 8

iR5000N/6000N (with BW2) - Boot ROM 9.28N Sys 72.01N

iR5000i/6000i - Boot ROM 9.28N Sys 8.02N Msg 8.02 RUI 8.01 HD Format 7

iR7200 - Boot ROM 13.33C Sys 71.01 Msg 71.01 RUI 70.20 HD Format 5

iR7200N - Boot ROM 13.33N Sys 71.01N

iR8500 - Boot ROM 13.33C Sys 71.01 Msg 71.01 RUI 70.20 HD Format 10

iR8500N - Boot ROM 13.33N Sys 71.01N

iR105 - Boot ROM 13.33C Sys 71.01 Msg 71.01 RUI 70.20 HD Format 5

iR105N - Boot ROM 13.33N Sys 71.01N

iR C3200 - Boot ROM 2.05 Sys 7.01 Msg 7.01 RUI 4.02 HD Format 14 G3 Fax 51.02

Dcon 8.02 Rcon 3.01

iR C3200N - Boot ROM 2.05N

Read More..

Driver Epson Stylus Photo R230 For XP/7

Enter content drivers Epson Tool Pic R230 :

- Enter analyse : SPR220_230_W2K_653E_s.exe

- Line Size : 9,2 MB

- File Type : -

- File Contains : Software aplication drivers R230

Compatibility and Method Requirements :

- Windows 7

- Windows Vista

- Windows XP

How to put the drivers Epson Stylus Icon R230 for Windows :

1. Download the utility Epson Tool Pic R230, for fixing download see below

2. Sort careful the printer usb line obstructed into the laptop or machine

3. Open the enter has been downloaded, individual emit on the line

4. Grow the manual that materialize during instalment

5. When fattened doing experiment photograph

6. If endeavor impress is not a difficulty, then we person succeeded utility artefact


Unite Download drivers printer Epson Stylus Picture R230 (Nonstop Instruction) : DOWNLOAD

Read More..

HP DeskJet 842c

Cartridge HP 15 black & Cartridge HP 17 colour

 Refill Instructions for HP 15 black|HP 17 colour

Read More..

Canon Office All In One Printer

Canon MX300, MX310

MX300

 Cartridge Type CL-41|PG-40

PG-40 Black Cartridge CL-41 Color Cartridge

Refill Instructions for CL-41|PG-40

Read More..

HP Deskjet 2400 series

HP Deskjet F2480 All-in-One Printer

The HP Deskjet F2480 All-in-One is designed for users looking for an affordable and easy to use colour printer with a range of basic one-touch tools and cost-saving features, plus the extra versatility of built-in scanning and copying...Combine content from multiple sites onto a single page to save ink and paper – you can even resize and edit before printing...HP provides...  

Cartridge HP 60 black & Cartridge HP 60 colour

HP 60 black & HP 60 colour catridge

 Refill Instructions for HP 60 black|HP 60 colour

Read More..

HP DeskJet 920c

HP DeskJet 920c/940c

The Deskjet 920c does a nice job on text, which looks clean and attractively weighted. Gray-scale graphics look detailed and realistic even on ordinary paper, while color graphics and glossy photos show superb detail and shading. The 920cs driver offers useful features, including a gray-scale modification setting for better faxing and copying. The paper tray folds up when empty, so you can recover some desk space when youre not using the printer.

Cartridge HP 15 black & Cartridge HP 78 colour

 Refill Instructions for HP 15 black|HP 78 colour

Read More..

Driver Printer EPSON WorkForce 435

Download EPSON WorkForce 435 Driver & Software for Windows, Linux and Mac

Compatibility Device :
EPSON WorkForce 435 Driver
EPSON WorkForce 435 Printer Driver       
EPSON WorkForce 435 Scanner Driver
Windows 32-bit and 64-bit
Linux and Mac

Read More..

software program Adjustment Program

* Stylus Photo Epson 880 - 888
* Stylus Photo Epson C83 - C85
* Stylus Photo Epson R210 - r220
* Stylus Photo Color Epson Stylus C680,777
* Stylus Photo Epson C59
* Stylus Photo Epson C63,C64,C65
* Stylus Photo Epson Stylus CX4900, CX5900,C79, R270
* Stylus Photo Epson Stylus C540, C580
* Stylus Photo Epson R900

Read More..

Canon BJC 1000 Serie

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
Canon BJC-2000 BJC-2100 Serie
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Read More..

HP OfficeJet 5110

HP OfficeJet 5110/5110xi

 Cartridge HP 15 black & Cartridge HP 78 colour

 Refill Instructions for HP 15 black|HP 78 colour

Read More..

Asus X202E VivoBook Driver Windows 8 64 bit

Download drivers Asus X202E VivoBook for Windows 8 64-bit
Chipset
Intel INF Update Driver Version : V9.3.0.1021
Download
Audio / Sound
Realtek Audio Driver Version : V6.0.1.6754
Download
Via Audio Driver Version : V6.0.10.1100
Download
Display / VGA
Intel Graphics Driver Version : V9.17.10.2843
Download
Touchpad
ASUS Smart Gesture (Touchpad Driver) Version : V1.0.35
Download
USB
ASUS USB Charger Plus Version : V2.1.4
Download
HDD / Storage
Intel Rapid Storage Technology driver Version : V11.5.0.1207
Download
Camera / Webcam
Life Frame3 Utility Version : V3.1.7
Download
Card Reader
Alcor Multi-Card Reader Driver Version : V3.4.117.01527
Download
Bluetooth
Atheros BlueTooth driver Version : V8.0.0.206
Download
Azurewave BlueTooth driver Version : V12.0.0.2200
Download
Lan / Ethernet
Atheros LAN Driver Version : V2.1.0.7
Download
Wi-Fi / Wireless Lan
Atheros Wireless Lan Driver and Application Version : V6.30.59.49
Download
Atheros Wireless Lan Driver and Application Version : V10.0.0.209
Download

Read More..

Common Printer Problems and Solutions

Common Printer Problems and Solutions

No Power to Printer
If you cannot see the power light on, even if you have switched on the printer, you need to check the connections. Generally, there are two cords that run from the printer, one to the computer and the other to the power source. Remove and reconnect all ends of the cords, and then try to switch on the printer. If this does not resolve the problem, you might need to take help from the companys service engineer.

Printer Takes in all Papers
There can be times when you give a print command and the device takes in a chunk of papers for processing. This problem is occurs when the papers in the tray stick to each other. To solve this issue, you need to separate the papers by fanning the paper edges before putting them in. Another way to prevent this problem is to keep the paper pack in a cool, dry place.

Paper Jam Error
This is a common problem in a printer that is connected to a network of computers and is used frequently. Nowadays, printers have a display which gives a paper jam error. In advanced printers, you simply need to restart the printer to get the jammed paper ejected. You can even search for an eject button to remove the jammed paper. Or else, you can choose the traditional way of lifting the top cover and removing the crumpled sheets.

Poor Print QualityPoor printing quality can mean anything such as an improper shade, white lining on the paper, a smudgy image, and so on. If you are getting smudgy prints, the problem generally lies in selected print settings. Text matter should be printed at a low quality, whereas high quality settings are suitable for printing pictures. If the print quality is not acceptable in terms of color and shade, a possible cause can be the ink wells running empty. Get the ink cartridges filled or replaced if used for a long time. Leaking cartridges can result in spotting of ink of print paper. One laser printer troubleshooting tip, to resolve the problem of poor quality print, is to replace toner cartridges or toner drum. When it comes to buying printer parts like toners and cartridges, opt for the same brand which the printer belongs to. Using products from other brands may damage the output quality and even nullify the warranty.

Printing Blank PagesIf the printer is throwing out blank papers even after giving the print command, you need to clean the printer head. This can either be done by using the function on the printer itself, or from the Printing Preferences option in the Control Panel. In case you have replaced the ink cartridge and are getting blank pages as prints, see if the tape on the cartridge is removed.

Printing Weird CharactersIf the printer is working but is printing some weird characters on the page, the drivers are to be blamed. Drivers are specific applications which help the hardware communicate with the main computer for efficient functioning. You will have to update the drivers or install new drivers from the manufacturers website. In most cases, drivers are available for download in the support section of the website. This driver updation can even resolve the issue where the printer is not recognized by the computer.

Installation ProblemsIf you are getting any kind of installation errors, see that you have followed the correct procedure to configure the network printer. The correct link to configure a printer is: Start → Control Panel → Hardware and Sound → Printers → Add a Printer and follow the instructions. A majority of the errors in printer installation are resolved by updating the drivers to the latest versions. Another troubleshooting step is to run an antivirus program to diagnose if the virus is causing the problem.

No Print JobsWhen any print command is given to a network printer, it first gets stored in the spooler before being executed. The files are automatically deleted only after the job has been processed. If there is no response from the printer, one possible cause is the spooler being full with print commands. You need to navigate to the spooler directory and manually delete the pending print jobs.

Most of the above mentioned steps on solving common printer problems can be applicable in the troubleshooting of wireless printers as well. In addition, you may need to restart and reset the complete setup which includes the printer, wireless router, and the computer. Remember that these are just the troubleshooting steps to be followed on a standard printer. The steps may differ from model to model.

Read More..

hp photosmart ink cartridge

HP Photosmart Ink Cartridge

Read More..

Driver HP Color LaserJet CP1215 windows xp 7

Compatibility and system requirements :

- Windows 7
- WIndows Vista
- Windows XP
- Windows 2000
- all drivers Support 32bit and 64bit

Download link HP Color LaserJet CP1215  Printer drivers

Read More..

Adjustment Program for Stylus C40UX C40SX C20UX C20SX Operating Instructions

1. Operating Environment:
l Windows95 OSR2.0 or higher and Windows98.
l (for Windows95)
LPT1-LPT3 are used.
(for Windows98)
LPT1-LPT3 and EPUSB1-EPUSB3 are used.
2. How to use the Adjustment Program:
Copy the Adjustment Program on the desktop, and then , execute the program.
3. Cautions:
1) When you confirm the function of USB port properly, you must use Windows98
pre-installed PC. It cannot function properly on Windows95.
2) When you operate this program on the Windows95 or Windows98, you cannot
operate it with Status Monitor is running. Close Status Monitor on Task tray
before start the Adjustment Program.
3) Do not change the setting for “Font size” in “settings tab” of the
“Display Property”window.
4) Please do not start the Adjustment Program before connecting the printer with
a parallel I/F cable or USB I/F cable.
If you do not follow the instruction, the program will freeze.
5) Please do not send any commands during Check Pattern printing.
6) In case of turning off the printer, or the parallel I/F cable or USB I/F
cable is removed during booting the Adjustment Program, please restart the Adjustment Program.

Adjustment Program for Stylus C40UX / C40SX / C20UX / C20SX : Download
Adjustment Program for Stylus C61/C62: Download

Read More..

Fujitsu LifeBook TH701 drivers for Windows 8

Download drivers Fujitsu LifeBook TH701 for Windows 8 32/64 bit

Audio / Sound, Realtek Version : v6.0.1.6714
File name : Audio_Realtek_v6.0.1.6714-DR12-1139_W8-32-64.exe
Download

Display / VGA, Intel Version : v9.17.10.2843
File name : VideoI_Intel_v9.17.10.2843-DR12-0966_W8-64.exe
Download

Display / VGA, Nvidia Version : v305.46
File name : VideoN_Nvidia_v305.46-DR12-0961_W8-64.exe
Download

Touchpad, Alps Version : v8.100.411.105
File name : Mouse_Alps_v8.100.411.105-DR12-0627_W8-64.exe
Download

FingerPrint, AuthenTec (Win8 32) Version : v3.4.1.1013
File name : FingerPrint_AuthenTec_v3.4.1.1013-DR12-0897_W8-32.exe
Download

FingerPrint, AuthenTec (Win8 64) Version : v3.4.1.1013
File name : FingerPrint_AuthenTec_v3.4.1.1013-DR12-0898_W8-64.exe
Download

Shock Sensor Driver, Fujitsu Version : v2.01.00.000
File name : ShockSensorDrv_FJ_v2.01.00.000-DR12-0712_W8-64.exe
Download

Camera / WebCam, Sonix Version : v6.0.1209.0
File name : WebCam_Sonix_v6.0.1209.0-DR12-0996_W8-32-64.exe
Download

Media Slot, Realtek Version : v6.2.8400.30137a
File name : MediaSlot_Realtek_v6.2.8400.30137a-DR12-0578_W8-W7-XP-32-64.exe
Download

Bluetooth, Intel Version : v2.5.0.0248
File name : BluetoothI_Intel_v2.5.0.0248-DR12-0909_W8-32-64.exe
Download

LAN / Ethernet, Realtek Version : v8.002
File name : LAN_Realtek_v8.002-DR12-0618_W8-64.exe
Download

Wireless Radio Swtich, Fujitsu Version : v1.0.0
File name : WirelessRadioSwtichDriver_FJ_v1.0.0-DR12-0801_W8-64.exe
Download

Wi-Fi / Wireless LAN, Intel Version : v15.5.0.42
File name : WLANiBT_Intel_v15.5.0.42-DR12-0839_W8-64.exe
Download

Wi-Fi / Wireless LAN, Intel Version : v15.5.4.45
File name : WLANi_Intel_v15.5.4.45-DR12-1124_W8-32-64.exe
Download

Read More..

Brother MFC J220 Drivers Download Windows 7 XP

Download Driver Printer Brother MFC-J220
Compatibility and System Requirements :

Windows 7
Windows Vista
Windows XP
All support 32bit and 64bit

Link Download Driver Printer Brother MFC-J220

How to install for Windows :
1. Download the driver Brother MFC-J220, for link download see below
2. Make sure the printer usb cable uplugged from laptop or computer
3. Open the file has been downloaded, double click on the file
4. Follow the instructions that appear during installation
5. When finished plugged usb cable and wait detecting hardware
6. When done doing test print and scan test
7. If test print and scan test is not a problem, then we have succeeded driver installation

Read More..

Pickup feed and delivery system hp laserjet p 4010 AND 4015 series

The pickup, feed, and delivery system consists of various rollers that the product motors drive. The product uses Tray 1 (the manual feeding tray) and a cassette in Tray 2 as media sources. The printed media is delivered to either the rear output bin (straight-through printing) or the top output bin (the default destination). A number of 500-sheet feeders and one 1,500-sheet feeder can be added to certain models. These accessories are discussed later in this chapter. The Tray 1 paper sensor (on the Tray 1 pickup assembly; PS105) detects media in Tray 1. The Tray 2 paper sensor (PS101) detects media in Tray 2. The paper-size switch (SW102) detects the media size that is loaded in Tray 2.

Two motors, a clutch, and a solenoid that are controlled by the DC controller PCA drive all of the rollers in the product.
The pre-feed, top-of-page, and fuser-assembly delivery sensors (PS102, PS103, PS700) detect media arriving and passing along the paper path. If the media does not reach or pass these sensors within a specific amount of time, the microprocessor on the DC controller PCA halts the product functions and a jam error message appears on the control-panel display.

Figure 5-24 Pickup, feed, and delivery system

The pickup-and-feed system is divided into two blocks: The pickup-and-feed block and the fuser/delivery block.

Figure 5-25 Pickup, feed, and delivery blocks

Pickup-and-feed block
The following functions take place in the pickup-and-feed block:
• Detection of media
• Detection of media-size
• Detection of media entering the paper path from Tray 1 or Tray 2
• Lifting of the Tray 2 paper plate
• Prevention of multiple-feeds
• Correction of page skew

When it receives a print command from the host computer, the DC controller PCA turns on the feed motor (M101) power. The motor drives the Tray 2 pickup, feed, and separation rollers. The drum motor power also turns on. The laser/ scanner motor power turns on.

The DC controller PCA then activates the feed clutch (CL101) to rotate the feed roller. The Tray 2 pickup solenoid is activated (SL101) and the pickup arm descends. The pickup roller touches the media and a sheet is fed into the product. The separation roller prevents multiple sheets of media from being fed at one time.
As the pre-feed sensor (PS102) detects the media, the dc controller PCA turns off the clutch, which stops the media. When the DC controller PCA detects that the laser/scanner is ready it activates the feed clutch again. The feed roller moves the media farther into the product. The registration shutter corrects page skew and the media is transported to the fuser/delivery block.

Fuser/delivery block
The fuser/delivery block consists of rollers, sensors, the fuser, and the output delivery assembly. The rollers transport the media through the fuser/delivery block paper path. The fuser applies heat and pressure to the media to permanently bond the toner image to the media. The output delivery assembly sends the printed media either to the rear output bin (if the rear output door is open) or to the top output bin (the default output delivery bin). Sensors along the paper path detect media movement, jams, and the top output-bin capacity.

Paper trays
Printing from Tray 1
The Tray 1 paper sensor (PS105) detects the presence of media in Tray 1. When the DC controller PCA receives the print command, the product starts the initial rotation phase, which consists of feed motor warm-up, scanner motor warm-up, high-voltage control sequence, and fuser warm-up. When the initial rotation phase ends, the Tray 1 pickup solenoid (SL102) is activated.

The cam rotates, the paper-tray lifter rises, and the media comes in contact with the Tray 1 pickup roller. At the same time, the Tray 1 pickup roller rotates twice and picks up a sheet of media from Tray 1. The separation pad prevents additional sheets from feeding with the first sheet.

The sheet then reaches the registration assembly, where its skew is corrected. The sheet then passes through the transfer, separation, and fusing stages; through the delivery unit; and is to the output bin.
IT NOTE: If media is removed from Tray 1 after the initial rotation phase, but before the pickup roller pulls the media from the tray, the Tray 1 pickup roller might continue to rotate up to six times, after which a jam detected.

Printing from Tray 2

When the DC controller PCA receives the print command, the feed motor (M101) and scanner motor start their rotation. When the feed motor reaches its prescribed speed, the feed roller clutch (CL101) and Tray 2 pickup solenoid (SL101) are activated. (The feed motor rotation drives the Tray 2 pickup roller, Tray 2 feed roller, Tray 2 separation roller, and paper-feed rollers.)
The Tray 2 pickup roller, which the pickup solenoid activates, rotates once and picks up the media in the tray. The separation roller prevents additional sheets from feeding with the first sheet, and the media is fed to the pre-feed sensor (PS102).
The sheet then reaches the registration assembly, where its skew is corrected. The sheet then passes through the transfer, separation, and fusing stages; through the delivery unit; and to the output bin.

Formatter system
The formatter is involved in the following procedures.
• Controlling the Sleep mode
• Receiving and processing print data from the various product inputs
Monitoring control-panel functions and relaying product status information (through the control panel and the bidirectional input/output)
• Developing and coordinating data placement and timing with the DC controller PCA


Storing font information
• Communicating with the host computer through the bidirectional interface
The formatter receives a print job from the bidirectional interface and separates it into image information and instructions that control the printing process. The dc controller PCA synchronizes the image-formation system with the paper-input and -output systems, and then signals the formatter to send the print-image data.
The formatter also provides the electrical interface and mounting locations for an EIO card, additional memory DIMMs, and the hard-disk accessory.
Sleep mode
period of time. When the product is in Sleep mode, the control-panel backlight is turned off, but the product retains all product settings, downloaded fonts, and macros. The default setting is SLEEP MODE=ON, with a 30-minute idle time. Sleep mode also can be turned off from the RESETS menu on the control panel.
The product exits Sleep mode and enters the warm-up cycle when any of the following occurs.
• A print job, valid data, or a PML or PJL command is received at the serial port or EIO card.
• A control panel key is pressed.
The top cover is opened.
• A tray is opened.
The engine-test button is pressed.
& NOTE: Error messages override the Sleep message. The product enters Sleep mode at the
appropriate time, but the error message continues to appear.
Resolution Enhancement technology
The formatter contains circuitry for Resolution Enhancement technology (REt), which modifies the standard video dot data on its way to the dc controller PCA to produce "smoothed" line edges. The REt can be turned on or off from the control panel or from some software programs. The default setting is medium.
If NOTE: The REt settings that are sent from software programs or printer drivers override the control-panel settings.

EconoMode

The EconoMode setting uses up to 50% less toner than standard mode printing by reducing the dot density. However, EconoMode does not extend the life of print-cartridge components. EconoMode, which can be thought of as "draft mode," can be selected from the control panel (PRINT QUALITY menu) and through some software programs and printer drivers. The default setting is OFF.
A CAUTION: HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, it is possible that the toner supply will outlast the mechanical parts in the print cartridge.
i? NOTE: EconoMode does not affect print speed or memory usage, or extend the life of the print cartridge.

Input/output

The following sections discuss the input and output features of the product.

USB

The product includes a universal serial bus (USB) 2.0 connection.
Embedded print server
For all models except the HP LaserJet 4014 base model, the product includes an HP Jetdirect embedded print server for connecting to a 10/100Base-TX network.
Expanded I/O
An optional expanded I/O (EIO) card can be installed in the designated slot on the formatter. It provides automatic I/O switching between multiple computers or networks that are connected to the product.
Hard-disk accessory
The optional hard-disk accessory can be mounted in one of the EIO slots on the rear of the formatter. The optional ElO-based hard disk is used for creating multiple original prints (mopies) and storing forms, fonts, and signatures.

CPU

The product formatter incorporates a 400 MHz RISC processor.
Product memory
If the product encounters a problem when managing available memory, a clearable warning message appears on the control panel.
Some product messages are affected by the auto-continue and clearable warning settings on the control-panel SYSTEM SETUP menu. If CLEARABLE WARNING=JOB is set on the control panel, warning messages appear on the control panel until the end of the job from which they were generated. If CLEARABLE WARNING=ON is set, warning messages appear on the control panel until OK is pressed. If an error occurs that prevents printing and AUTO CONTINUE=ON is set, the product goes offline for 10 seconds before it returns online. If AUTO CONTINUE=OFF is set, the message appears until OK is pressed.
Read-only memory
Besides storing microprocessor control programs, the read-only memory (ROM) stores dot patterns of internal character sets (fonts).
Random-access memory
The random-access memory (RAM) contains the page, I/O buffers, and the font storage area. It stores printing and font information received from the host system, and can also serve to temporarily store a full page of print-image data before the data is sent to the print engine. Memory capacity can be increased by adding DIMMs to the formatter. Note that adding memory (DIMMs) might also increase the print speed for complex graphics.

DIMM slot

The DIMM slot can be used to add product memory.

Nonvolatile memory
The product uses nonvolatile memory (NVRAM) to store I/O and information about the print environment configuration. The contents of NVRAM are retained when the product is turned off or disconnected.
Memory Enhancement technology
The HP Memory Enhancement technology (MEt) effectively doubles the standard memory through a variety of font- and data-compression methods.
If NOTE: The MEt is available only in PCL mode; it is not functional when printing in PS mode.
PJL overview
Printer job language (PJL) is an integral part of configuration, in addition to the standard printer command language (PCL). With standard cabling, use PJL to perform a variety of functions.
• Two-way communication with the host computer through a bidirectional parallel connection. The
product can send the host computer information about such things as the control panel settings,
and the control panel settings can be changed from the host through two-way communication.
• Dynamic I/O switching. The product can be configured with a host on each I/O by using dynamic
I/O switching. Even when the product is offline, it can receive data from more than one I/O
simultaneously, until the I/O buffer is full.
• Context-sensitive switching. The product can automatically recognize the personality (PS or PCL)
of each job and configure itself in that personality.
• Isolation of print environment settings from one print job to the next. For example, if a print job is
sent to the product in landscape mode, the subsequent print jobs are printed in landscape mode
only if they are formatted for it.
PML
The printer management language (PML) allows remote configuration and status monitoring through the I/O ports.
Control panel
The formatter sends and receives product status and command data to and from a control-panel PC

Read More..